Table of Contents
Advertisement
The crimp-and-insert connector is normally supplied with Option A3E.
Extra Crimp-and-Insert
Contact Hewlett-Packard if additional connectors are needed.
Connectors
Order HP 91484B.
Option A3H
The Ribbon Cable Connector Terminal Option provides a terminal housing
and ribbon cable connectors. The connectors are designed to be used with
64-pin 0.05 inch center ribbon cables (not provided). Use Figure 1-12 to
make the connections.
Note
In Figure 1-12, the center row of each connector is not used in the ribbon
cable. The center row of both connectors is module ground (GND).
Figure 1-11. Option A3H Ribbon Cable Connector
Option 135
The Terminal Module Housing Option provides a terminal housing with no
connectors of any type.
The user-supplied connector must be a DIN 41612 type C female,
11.6 mm dimension as shown above.
Chapter 1
Module Setup and Installation
29
Advertisement
Table of Contents
