Table of Contents
Advertisement
Combining
Channels
Channels in Series
Channels in Parallel
CAUTIONS
34
Module Setup and Installation
You can combine channels in series to obtain higher output voltages or in
parallel to obtain higher output currents.
•
All channels connected in series MUST be configured as isolated
channels (with isolated plug-on modules installed).
•
Up to 3 channels may be combined, but the output voltage MUST
NOT exceed 42 Vdc/42 Vpeak.
•
Channels may be either Isolated or Non-Isolated.
•
Up to 16 channels may be combined.
Figure 1-15 shows how to combine voltage channels (in series) and current
channels (in parallel).
All SERIES CONNECTED output channels MUST be configured as
ISOLATED OUTPUTS.
When combining output voltage channels, be sure not to exceed the
maximum module isolation rating of 42 Vdc or 42 Vpeak.
Figure 1-15. Combined Channels Output Connections
Chapter 1
Advertisement
Table of Contents
