Current Calibration Status Register - HP E1418A User Manual

Current Calibration
Status Register
Address
Base + 186
16
Notes
149 HP E1418A Register-Based Programming
The Current Calibration Status Register provides a non-volatile record of
the current calibration status for each channel. This register is non-volatile.
Bit 15 14 13 12
READ Ch Ch Ch Ch
16 15 14 13
WRITE
Curr Curr Curr Curr
Cal Cal Cal Cal
Stat Stat Stat Stat
Ch XX Curr Cal Stat: This field is set to a one (1) when the channel has
been successfully current calibrated. This field is set to a zero (0) when the
channel is not current calibrated.
This register is not set or used by the hardware. The HP E1418A SCPI
driver, if used to calibrate the module, automatically sets the bits in this
register. If you use register programming to calibrate this module, you may
wish to use this register to record the calibration status.
The Voltage Calibration Status Register, the Current Calibration Status
Register, the Calibration Isolation Status Register, and the Calibration Card
Configuration Register are used together to store the overall calibration
status of the module.
11 10 09 08 07
Ch Ch Ch Ch Ch
12 11 10 09 08
Curr Curr Curr Curr Curr Curr
Cal Cal Cal Cal Cal
Stat Stat Stat Stat Stat
06 05 04 03 02
Ch Ch Ch Ch Ch
07 06 05 04 03
Curr Curr Curr Curr Curr
Cal Cal Cal Cal Cal
Stat Stat Stat Stat Stat Stat
Appendix B
01 00
Ch Ch
02 01
Curr
Cal Cal
Stat