Flying The Kudo ® Array In The Vertical Position - L-Acoustics kudo multi-mode wst Rigging Manual

11. For each KUDO ® enclosure, remove both dolly board BLP by pulling on both lanyards.
®
12. On each KUDO enclosure, connect the loudspeaker cables (refer to the ''KUDO
!
Secure the loudspeaker cables to the KBUMP.
For clarity purposes the loudspeaker cables will not be represented on the following figures.
IMPORTANT
6.1.2 Flying the KUDO
!
All along the following procedure, systematically ensure that each BLP is correctly secured by
pulling on it.
Ensure that no one is standing under or in close proximity to the system when it is being
raised in the air.
WARNING
1.
Attach the motor hooks to the KBUMP shackles. Lift the KBUMP/first KUDO
KUDO_RM_ML_1.0
Figure 12: Pulling on the dolly board BLP lanyards
®
array in the vertical position
Figure 13: Raising the KBUMP/first KUDO
w w w . l - a c o u s t i c s . c o m
®
'' user manual).
®
assembly in the horizontal position.
® assembly
EN
13 en