Connecting Through A Telnet Session - Nortel MOG6xx Installation And Configuration Manual

46
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
If using Windows 2000, Service Pack 2 must be installed to enable the use of
Note:
HyperTerminal™.
Press Enter to display the login screen.
3
Enter the default login name (admin) and the default password (admin).
4
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See

Connecting through a Telnet session

Run a Telnet session to the IP address of the WLAN IP Telephony Manager 2245.
1
Enter the login name and the password.
2
Programming note: The login name and password are case-sensitive.
The NetLink SVP-II System menu appears. See
WLAN IP Telephony Manager 2245 configuration
NetLink SVP-II System menu
NetLink SVP-II System menu
on page 47.
on page 47.