Table of Contents
Advertisement
90
Configuring the network
Select Network Configuration from the NetLink OAI System menu.
1
The Network Configuration screen appears (see
Note: * - The Allow FTP Connections option appears only for MOG7xx models.
Figure 22 Network Configuration screen
Configure the following fields with information provided by the network administrator:
2
•
Ethernet Address – this is the MAC address of the WLAN Application Gateway 2246.
This address is set at the factory.
•
IP Address – enter the complete IP address for the WLAN Application Gateway 2246,
including digits and periods. Do not use DHCP. The IP address can be changed after initial
configuration.
•
Hostname – the default host name can be changed. This is the name of the WLAN
Application Gateway 2246 to which connection has been made. This name is for
identification purposes only. Spaces cannot be entered in this field.
•
Subnet Mask – Enter the subnet mask defined by the network administrator.
•
Default Router – DHCP or static IP address.
•
Allow Telnet Connections – Enter Y (Yes) to allow connection to the WLAN Application
Gateway 2246 through Telnet. Enter N (No) if no Telnet connection is allowed.
•
Allow FTP Connections – Yes/No (MOG 7xx only).
Appendix B: WLAN Application Gateway 2246
Figure
22).
Advertisement
Table of Contents
