Table of Contents
Advertisement
72
From the System Status Menu screen, select Error Status. The Error Status screen displays
active alarms on the WLAN IP Telephony Manager 2245.
required to eliminate the alarm.
Table 7 WLAN IP Telephony Manager 2245 active alarms and actions
Alarm text
Maximum payload usage reached
Maximum telephone usage reached
Maximum Access Point usage reached
Maximum call usage reached
SRP audio delayed
SRP audio lost
No IP address
Press C to clear all alarms that can be cleared.
Network Status screen
The WLAN IP Telephony Manager 2245 is connected to the Ethernet network (LAN). The
information about that connection is provided on the Network Status screen. The screen displays
information about the Ethernet network. This information can help troubleshoot network
problems.
To access the Network Status screen, select Network Status from the System Status Menu
screen. The Network Status screen is shown in
Troubleshooting
Table 7
lists the alarms and the actions
Action
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Reduce usage, clear alarm
Configure an IP address
Figure 12 on page
73.
Advertisement
Table of Contents
