Connecting Through A Serial Port; Figure 19 Cable To Port Connection - Nortel MOG6xx Installation And Configuration Manual

Connecting through a serial port

Connect the WLAN Application Gateway 2246 to the serial port of a terminal or PC using a
1
DB-9 female, null-modem cable. See

Figure 19 Cable to port connection

LAN
Ethernet
switch
WLAN Application
Gateway 2246
Run a terminal emulation program (such as HyperTerminal™), or use a VT-100 terminal with
2
the following configuration:
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
Note: If using Windows 2000, Service Pack 2 must be installed to enable the use of
HyperTerminal™.
Reset the system.
3
The following appears on the terminal:
04830130
Type the following command using the terminal or PC keyboard:
4
0255CC [CTRL M] [CTRL J]
The command does not display on the screen as it is typed.
The login screen appears. If an error was made when entering the command string, the
message "Ill Formed Packet" appears. It appears as a series of numbers followed by some
form of the typed command. If this occurs, repeat Step 3 and Step 4.
Figure 19.
RS-232
port
RS-232
port
Terminal or PC
Appendix B: WLAN Application Gateway 2246
87