Configuring the OAI Box
Select OAI Box Configuration from the NetLink OAI System menu.
1
The OAI Box Configuration screen appears (see
Figure 21 OAI Box Configuration screen
Note 1: ** – Option appears only on the MOG6xx model.
Note 2: * – This option does not appear unless "Use NetLink GW with mogX00" is set to
"Yes", as it is in this screen, which is the default.
Configure the following fields with information provided by the network administrator:
2
•
Use NetLink GW with mogX00 – change this option to No.
•
TFTP Download Master – enter the IP address of the TFTP Server.
•
Maintenance Lock – the system sets this option to Yes after maintenance activities have
been performed that require a reset. This option cannot be changed. It is automatically set.
Reset the system at exit to clear Maintenance Lock. Maintenance Lock prevents any new
calls from starting.
•
Reset System – if this option is set to Yes, the WLAN Application Gateway 2246 is reset
after pressing ENTER.
•
Reset All Systems – not applicable.
Press Esc on the keyboard to return to the NetLink OAI System menu.
3
Figure 21 on page
89).
Appendix B: WLAN Application Gateway 2246
89