Configuring The Telephone Line; Figure 24 Telephone Line Configuration - Nortel MOG6xx Installation And Configuration Manual

Configuring the Telephone Line

Each WLAN Handset 2210/2211 that uses the application's features must be configured with its
line number and MAC address. The name and extension number of the WLAN Handset 2210/
2211 user can be entered. Obtain this information from the WLAN Handset 2210/2211 Planning
Worksheet. See Planning Worksheet for WLAN Handsets 2210/2211
The WLAN Handsets 2210/2211 require special configuration. This can include configuring
options on the DHCP server or on the WLAN Handset 2210/2211 to allow it to communicate with
the WLAN Application Gateway 2246. Be sure these setting are correct. Refer to
WLAN Handsets 2210/2211
The system does not allow the same WLAN Handset 2210/2211 to register to two different lines.
Use Esc to cancel any unwanted transaction.
Follow the steps to configure the telephone lines for the application.
Configuring a telephone line:
From the NetLink OAI System screen, select Telephone Line Configuration and press
1
Enter.
The Telephone Line Configuration screen appears. See

Figure 24 Telephone Line configuration

Use the arrow keys to navigate to the Name and Extension fields.
2
Enter the associated data for the wireless handsets.
3
on page 60 for more information.
on page 106.
Figure 24.
Appendix B: WLAN Application Gateway 2246
93
Configuring the