Ac/Power Precautions; Power Cords And Attachments - Christie CP2208 Installation And Setup Manual

AC/power precautions

Warning! Failure to comply with the following could result in serious injury.
• Use only the AC power cord that is provided with the projector. DO NOT attempt operation if the AC
supply is not within the specified voltage and power range.
• As a safety feature the projector is equipped with a three-wire plug with a third (grounding) pin. If
you are unable to insert the plug into the outlet, contact an electrician to have the outlet replaced.
DO NOT defeat the safety purpose of the grounding-type plug.
• DO NOT attempt operation if the AC supply is not within the rated voltage range, as specified on
the license label.
• Disconnect projector from AC before opening any enclosure.
Caution! Failure to comply with the following could result in minor or moderate injury.
• DO NOT allow anything to rest on the power cord. Locate the projector where the cord cannot be
damaged by persons walking on it or objects rolling over it. Never operate the projector if the
power cable appears damaged in any way.
• DO NOT overload power outlets and extension cords as this can result in fire or shock hazards.
• Only qualified service technicians are permitted to open projector enclosures and only if the
projector is disconnected from AC power.

Power cords and attachments

Warning! Failure to comply with the following could result in serious injury.
• A power cord rated for your region is provided with each projector. Ensure that you are using a
power cord, socket, and power plug that meets the appropriate local rating standards. Use only an
AC power cord recommended by Christie.
• DO NOT attempt operation if the AC supply and cord are not within the specified voltage and power
range.
• Use only the attachments and/or accessories recommended by Christie. Use of others may result
in the risk of fire, shock and personal injury.
CP2208 Installation and Setup Guide
020-102031-01 Rev. 1 (09-2015)
Installation and setup
6