Operation; Turning The Projector On; Logging On To The Projector; Activating Marriage - Christie CP2208 Installation And Setup Manual

Operation

Turning the projector on

Warning! Failure to comply with the following could result in serious injury.
DO NOT attempt to turn the projector on if the AC supply is not within the specified voltage range.
See Projector specifications
1. Ensure the circuit breaker for the projector is on.
2. On the touch panel controller (TPC), tap and hold the green power (

Logging on to the projector

1. On the touch panel controller (TPC), tap Menu > Login.
2. Select a user name in the Username list.
3. Enter your password.
4. Tap Login.

Activating marriage

You must complete marriage to display encrypted content and to comply with Digital Cinema
System Specification (the DCI specification). You cannot complete marriage remotely. In addition,
an authorized employee must be physically present to verify that the anti-tamper seal on the card
CP2208 Installation and Setup Guide
020-102031-01 Rev. 1 (09-2015)
on page 28 for power requirements.
) icon.
21