Setting Up A Supervisor Password - Pitney Bowes DM125 Operator's Manual

2 • System Setup for INVIEW™ Accounting

Setting Up a Supervisor Password

A Supervisor password can be used to prevent unauthorized account
changes within INVIEW Accounting. If you establish a Supervisor
password, a user will need to enter this password to add, edit, or
delete accounts; and for clearing account totals.
1. Press the Options key.
2. Press Page Down twice.
3. Select LockCode/Passwords.
4. Select Su per vi sor Password. If there is an existing supervisor
password, you are prompted to key in the 4-digit code.
PASSWORDS
◄Meter Lock Code
◄Supervisor Password
5. You then have a choice to either disable the password (if
present) or change (or establish) the password.
Supervisor Options
◄Disable password
◄Change password
A. To disable the password:
Select Disable Password. At the "Supervisor Password has
been disabled" message, select Continue.
B. To change or establish the password:
Select Change password. At the prompt, type in a new
password (4 digits) and select Continue. Re-enter the new
password again to confirm and select Continue. At the
"Supervisor Password has been enabled" message, select
Continue.
6. Press Clear (←) to return to Options menu.
SV62371 Rev. A
2-5