Table of Contents
Advertisement
Power Management Setup Page
This page sets some of the parameters for system power
management operation.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Power Management Setup
ACPI Function
Power Management
ACPI Suspend Type
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN
AC Resume Function
Wake Up Events
: Move
Enter : Select
F5:Previous Values
ACPI Function
Use this item to enable or disable the ACPI
function.
Power
This item acts like a master switch for the power-
saving modes and hard disk timeouts. If this item
Management
is set to Max Saving, power-saving modes occur
after a short timeout. If this item is set to Min
Saving, power-saving modes occur after a longer
timeout. If the item is set to User Define, you can
insert your own timeouts for the power-saving
modes.
ACPI Suspend
This item defines how your system suspends.
S1(POS), the suspend mode is equivalent to a
Type
software power down. If you select S3 (STR), the
suspend mode is a suspend to RAM – the system
shuts down with the exception of a refresh current
to the system memory.
PM Control by
This field allows you to control the PC Monitor's
power management features via Intel-Microsoft
APM
Advanced Power Management software. Once
you have enabled the APM interface, some
settings made in the BIOS Setup program may be
3: BIOS Setup Utility
Enabled
Press Enter
S1(POS)
Menu Level
Yes
Suspend --> Off
DPMS Support
3
Instant-Off
Always Off
Press Enter
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults
F7:Optimized Defaults
Item Help
35
Advertisement
Table of Contents
