Sorted Copy Tray; Horizontal Transport Unit - Konica Minolta bizhub 200 Service Manual

4. Other
4.4.9

Sorted Copy Tray

NOTE
• When removing the Sorted Copy Tray, set the Sorted Copy Tray to its home posi-
tion.
• If the Exit Tray (OT-601) is installed, remove it in advance.
[1]
[3]
[4]
[6]
[5]
4.4.10

Horizontal Transport Unit

[2]
16
[2]
4349F2C507DA
[3]
4349F2C509DA
[5]
4349F2C510DA
[1]
4349F2C511DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.0 Apr. 2006
1. Open the Front Door.
2. Remove the screw [1], and remove
the Front Door Stopper [2].
3. Remove the Horizontal Transport
Left Front Cover.
See P.14
4. Disconnect three connectors [3].
5. Remove two screws [4], and remove
the ground wire.
6. Remove six screws [5], and lift the
Sorted Copy Tray [6] upward and off
the copier.
1. Remove the Sorted Copy Tray.
See P.16
2. Remove the Front Right Door.
See P.14
3. While holding down the lock release
button [1], remove the Horizontal
Transport Unit [2].