Konica Minolta bizhub 200 Service Manual page 659

3. Other
NOTE
• Be sure to perform the following operation when the Variable Resistor is replaced.
8. Initialize the backup data.
See P.21
9. Perform document width detection adjustment.
See P.18
10. Turn OFF the Main Power Switch and turn it ON again and check whether size detec-
tion operates normally.
3.3.4 Complete Stamp Unit 2
[1]
[3]
[5]
[6]
14
[2]
4344F2C534DA
[4]
4344F2C535DA
[7]
4344F2C536DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.0 Apr. 2006
1. Open the Upper Door [1].
2. Open the Processing Guide [2].
3. Remove the screw [3] and the cover
[4].
4. Remove the screw [5] and discon-
nect the connector [6], and remove
the Complete Stamp Unit 2 [7].