Konica Minolta bizhub 200 Service Manual page 393

4. Disassembly/Reassembly
[3]
[6]
[9]
8
[4]
4040F2C687DA
[5]
[7]
4040F2C688DA
[8]
[10]
4040F2C689DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
5. Remove the screw [3] and the Guide
Plate [4].
6. Disconnect the connector [5] and
remove the hookup harness [6].
NOTE
• At reinstallation, use care not to
allow the hookup harness to ride
over the rib [7].
7. Remove the screw [8], disconnect
the connector [9], and remove TX
Marker Stamp 2 [10].
NOTE
• Make sure that this step is per-
formed only after the stamp (ink
portion) has been removed.