Konica Minolta bizhub 200 Service Manual page 160

Field Service Ver. 2.5 Jul. 2006
D. Print Density
Functions • To specify the default print density.
Use • To change the default print density.
• The default setting is "0".
Setting/
Procedure
E. Default Finishing Mode
• To set the default finishing mode selected when the screen shifts to the initial one.
Functions • The contents of the display vary depending on the types of finishing options mounted
on the machine.
Use • To change the default finishing mode selected when the screen shifts to the initial one.
• The default setting is "Non-Sort".
Setting/
Procedure
8.3.5 User's Choice 5/6
A. Sort/Non-Sort Auto Change
• To select whether to enable or disable the function that automatically switches between
Functions [Sort] and [Non- Sort] according to the number of originals and the number of copy sets
to be made.
• To set so as to enable the function that automatically switches between [Sort] and
Use [Non-Sort] according to the number of originals and the number of copy sets to be
made.
• The default setting is "ON".
Setting/
Procedure
B. Output Tray Settings
(1) Copier/Printer
• To specify the output tray for copies and computer printouts when output options are
mounted on the copier.
Functions
• The screen that appears differs depending on the options that are mounted on the
copier.
Use • To change the output tray for copies and computer printouts.
<Printer>
• The default setting is "1".
Setting/
<Copies>
Procedure
• The default setting is "2"; or "1" if the Mailbin Kin is mounted.
* ( ): when the Mailbin Kit is mounted
Confidential – for internal use only, do not distribute
-2 -1 0
"Non-Sort" Sort
Corner Staple 2 Staples
"ON" OFF
"1" 2
("1") "2"
1 2
Group
(3)
3
8. Utility/Counter Mode
121