Konica Minolta bizhub 200 Service Manual page 63

3. Periodical check
[12]
[14]
[17]
24
[13]
4040F2C520DA
[15]
[14]
4040F2C521DA
[16]
4040F2C522DA
[18]
4040F2C523DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
6. Remove two Screws [12] and the
Tray 1 Separation Roller installation
plate Assy [13].
7. Remove two C-clips [14] and the
Tray 1 Separation Roller installation
plate [15].
8. Remove the C-clip [16] and the Tray
1 Separation Roller Assy [17].
9. To reinstall, reverse the order of
removal.
10. Select [Tech. Rep. Mode] →
[Counter] → [Special Parts Counter]
→ [Tray 1] and clear the counter.
NOTE
• Install the Tray 1 Separation Roller
Mounting Bracket Assy [18] while
pressing the holder up so that it
coheres to the metal bracket of the
copier.