Konica Minolta bizhub 200 Service Manual page 408

Field Service Ver. 2.5 Jul. 2006
(2) RX Document
<F-CODE>
Functions • To set to receive text for every F-CODE
Use • When setting to receive text for every F-CODE
1. Touch the [RX Document].
2. Touch the [F-CODE].
Setting/ 3. Select the specific key, in which the F-CODE is to be registered.
Procedure 4. Touch [F-CODE] and make the necessary settings.
5. Touch [RX Doc. Settings], then select the desired processing type and touch [Enter].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
<Port>
• To set how text received for each line is processed, whether it is to be printed, for-
Functions
warded, etc.
Use • When printing, forwarding, or otherwise processing text received for each line.
1. Touch the [RX Document].
2. Touch the [Port].
3. Select [G3-1] or [G3-2].
Setting/
4. If [Yes] is selected for [Document Management], set how the received document is to
Procedure
be handled.
5. Touch [RX Doc. Settings], then select the desired processing type and touch [Enter].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
<All Other Documents>
Functions • To set how text received from a line other than the port is processed.
Use • When setting how text received from a line other than the port is processed.
1. Touch the [RX Document].
Setting/ 2. Touch the [All Other Documents].
Procedure 3. Touch [RX Doc. Settings], then select the desired processing type and touch [Enter].
* If [Forward] or [Print & Forward] is selected, set the forwarding destination.
Confidential – for internal use only, do not distribute
6. Utility/Counter Mode
23