C11B5: Side Staple 1 Drive Failure; C11B6: Side Staple 2 Drive Failure; C11D0: Crease Motor Drive Failure - Konica Minolta bizhub 200 Service Manual

10. Malfunction code
10.2.5

C11B5: Side Staple 1 Drive Failure

10.2.6

C11B6: Side Staple 2 Drive Failure

Staple Unit 1
Staple Unit 2
Step
Check the Staple Unit 1 and 2 con-
1 nectors for proper connection and
correct as necessary.
Check Staple Units 1 and 2 for
2 proper drive coupling, and correct
as necessary.
Staple Units 1 and 2 operation
3
check
4 Change Staple Units 1 and 2
5 Change PWB-C SK
10.2.7

C11D0: Crease Motor Drive Failure

Crease Motor (M10-SK)
Crease Roller Home Position Sensor (PC22-SK)
Step
Check the M10-SK connector for
1 proper connection and correct as
necessary.
Check M10-SK for proper drive cou-
2
pling and correct as necessary.
3 M10-SK operation check
4 PC22-SK I/O check
5 Change PWB-C SK
34
Relevant Electrical Parts
Action
Relevant Electrical Parts
Action
PWB-C SK PJ3C SK-1 to 2
PWB-C SK PJ2C SK-3 (ON)
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Aug. 2005
Main Control Board (PWB-C SK)
WIRING DIAGRAM
Control Signal
-
-
-
-
-
Main Control Board (PWB-C SK)
WIRING DIAGRAM
Control Signal
-
-
-
Location
(Electrical Component)
-
-
-
-
-
Location
(Electrical Component)
-
-
SD-502 D-7
SD-502 D-7
-