Permobil C400 Corpus 3G Lowrider Service Manual page 15

Permobil C400 Corpus 3G Lowrider
Removing the front fender
For this task the following tools are necessary:
• 1 Allen key 3 mm.
L
CAUTION!
If the chair is equipped with lighting, remove the
chassis- and seat lift cover. Disconnect the front-light
cabling at the connector fitted on the cabling.
1. Remove the three screws, see fig. 6.
2. Remove the front fender by lifting it upwards/
forwards.
Assembly of the front fender
Assemble the front fender in the reverse order.
Figure 6. Front fender.
Repairs
15