Permobil C400 Corpus 3G Lowrider Service Manual page 82

Permobil C400 Corpus 3G Lowrider
Mounting
1. Mount the seat angle mechanism using the four
screws. See fig. 125. It can be mounted in three dif-
ferent positions, depending on which chassis it is
being mounted on and the depth of the seat. See the
table below. Use a torque wrench to tighten the
screws. Tightening torque 24 Nm.
Seat depth
370 mm./15"
395 mm./16"
420 mm./17"
445 mm./18"
470 mm./19"
495 mm./20"
520 mm./21"
545 mm./22"
570 mm./23"
2.
L
WARNING!
The seat is heavy. This work should therefore
always be performed by two people. Be careful
with the cabling.
Mount the seat using the six screws. Have someone
help you lift the seat and then hold it in place while
the screws are inserted. Use a torque wrench to
82
Mounting position
C400 C500 C500S
1 1 3
1 1 3
1 1 3
1 1 3
1 1 3
1 1 3
2 2 3
3 3 3
3 3 3
Figure 125. The seat angle mechanism is held in place
by four screws.
Figure 126. The seat is held in place by six screws.
Repairs