Seat Support - Permobil C400 Corpus 3G Lowrider Service Manual

Permobil C400 Corpus 3G Lowrider

Seat support

Removal
1. Raise the seat lift to its highest position. To raise the
seat on a chassis with an electric seat lift that does
not work normally because the batteries are dis-
charged or the adjustment device is defective, see
Manual operation of Electric Seat lift, Page 41.
2. Switch off the main power switch on the control
panel.
3. Put the circuit breaker in the "OFF" position. It is ac-
cessed through a hole in the chassis cover. See
fig.78 Circuit breaker/Battery isolator., Page 54.
4. Remove the Seat lift cover and the chassis cover, see
Covers, Page 14.
5. To remove the seat support by rotating it counter
clock vise. See fig. 65.
Assembly
Fit the seat support in the reverse order.
NOTE!
Secure into position by turning it clock vise after the chas-
sis cover has been fitted.
48
Figure 65. Seat support.
Figure 66. Seat support fitted.
Repairs