Permobil C400 Corpus 3G Lowrider Service Manual page 36

Permobil C400 Corpus 3G Lowrider
6. Pull the cable casing forward, out through the slot in
the cable holder and detach the wheel lock release
cable from the magnetic wheel lock; see fig. 37
7. Lift up and chock up the wheelchair chassis so that
the wheel in question is free of the ground.
8. Loosen the shock absorbers front end. Follow the in-
structions on page 26 until paragraph 4.
9. Position the slewing bracket more downwards for
easier access to the magnetic wheel lock, see fig. 39.
10. Remove the three screws that secure the wheel lock;
see fig. 39. Note the position of the wheel lock re-
lease lever and rubber seal's placement to facilitate
subsequent reassembly Remove the wheel lock with
wheel lock disk and cover.
36
Figure 39. Remove the magnetic wheel lock.
Repairs