Permobil C400 Corpus 3G Lowrider Service Manual page 79

Permobil C400 Corpus 3G Lowrider
Mounting
1. Mount the front end of the actuator with the locking mechanism. See fig. 120.
2. Mount the rear end of the adjustment unit, fix into position using the circlip. See fig. 120.
3. Secure the cabling for the actuator in its fixing points. Consider the arrangement of the cables carefully and make
sure there is no risk of them getting trapped or otherwise damaged.
Connect the actuator contact to the contact block on the right side of the seat. See fig. 119. Fit the contact by
pushing it straight in at any point.
4. Mount the UniTrack rail on the left side of the seat. See UniTrack rails, Page 64.
5. Mount the seat plates. See Seat plates, Page 65.
Figure 120. The backrest actuator.
Repairs
79