Permobil C400 Corpus 3G Lowrider Service Manual page 106

Permobil C400 Corpus 3G Lowrider Adjustments
Turn the adjustment bar bracket
For this task the following tools are necessary:
• 1 Block spanner 10 mm.
With the armrests set both wide and low, the adjustment bar for the left armrest angle can touch the rear actuator
bracket for the backrest angle. If this is the case, turn the adjustment bar bracket.
1. Remove the lower bracket of the adjustment bar, which is secured with a screw, washer and nut. See fig. 166(1).
2. Turn the bracket 180° so the adjustment bar is closer to the center of the seat. See fig. 166(2).
3. Refit the lower bracket of the adjustment bar in its new position using the screw, washer and nut. See fig. 166(3).
Figure 166. Turn the bracket 180° so the adjustment bar is closer to the centre of the seat.
106