Unitrack Rails - Permobil C400 Corpus 3G Lowrider Service Manual

Permobil C400 Corpus 3G Lowrider Repairs

UniTrack rails

For this task the following tools are necessary:
• 1 Allen key 6 mm.
UniTrack rails are available in five different lengths that are used depending on the seat depth selected.
Removal
1. Remove the two screws that hold the rail in place. See fig. 93.
Assembly
1. Mount the UniTrack rail using two screws. See fig. 93. Use a torque wrench to tighten the screws.
Tightening torque 9.8 Nm.
Figure 93. The UniTrack rail is held in place by two screws.
64