Extended Load - Summa S class 2 series User Manual

S CLASS™ 2 cutter
 Extended load.
The function extended load makes it possible to define the limits of the Y axis so that the
cutter can cut outside the pinch rollers. The media needs to be loaded before this function
can be used.
Origin Pause
Configuration 1
Media size 50000 x 718 mm
Tool Tangential knife
Velocity 800 mm/s
Knife pressure 95 gr
Summa USB port 1 Summa USB port 1
1. Press on Media size
Two arrows will appear, together with an "apply" button.
3. Use
or
Two arrows will stay on the screen. The tool carriage will move to the left Y-axis limit.
4. Use
or
The cutting area in the Y-axis has now been redefined.
NOTE: Tracking is not guaranteed when using this mode.
Setup
Settings
Media alignment
Velocity 800 mm/s
Roll
Sheet
Extended
Actions
Load
2. Press on Extended
to reposition the right Y-axis limit (origin). Then press
to reposition the left Y-axis limit (define size). Then press
User's Manual
Home
Back
.
.
1-26