S Class 2 Cutter Components; The Cutter As Viewed From The Front; S Class 2 Cutter, Front View; Pinch Roller Lever - Summa S class 2 series User Manual

S CLASS™ 2 cutter

1.2 S CLASS 2 Cutter Components

1.2.1 The Cutter as viewed from the front

1. Pinch rollers: The pinch rollers clamp the media to the drive system to ensure accurate
tracking. The S120(T) has one and the S160(T) and S 140(T) have two extra pinch rollers
to ensure that wide media stays flat in the middle. The outer drive pinch rollers have a
selectable pressure; the extra rollers in the middle can be enabled or disabled. Extra
pinch rollers can be added.
Number of pinch rollers
Dual pressure
Low pressure
2. Touch panel: All cutter activity can be initiated from the 320x240 dot touch panel. The
panel displays information about the cutter's current status and/or actions that need to
be taken.
3. Pinch roller lever: This lever is used to raise and lower the pinch rollers for media
loading.
Setup
FIG 1-10
1-10

S CLASS 2 CUTTER, FRONT VIEW

S75 S120
2 2
0 1
User's Manual
S140 S160
2 2
2 2
1-5