Recut; Load; Extended Load; Align Load - Summa SUMMACUT User Manual

SummaCut cutter User's Manual

4.2.8 Recut

The RECUT instruction recuts the last file sent to the cutter (provided that it fitted into the
buffer). Press the key to execute the instruction.

4.2.9 Load

This menu can be used when loading sheet material. During the loading, the maximum
material length can be set.

4.2.10 Extended Load

This parameter is explained in section 1.5.3

4.2.11 Align Load

Align load is a special loading procedure to register markers so that pre-printed jobs can be
contour-cut. The parameter is explained in section 3.3.6

4.2.12 System Setup

Press to access the rest of the parameters and internal tests.
Detailed Operation 4-3