4.1 Introduction
This section is a detailed list of all parameters that can be changed and of tests that can be
initiated from the touch screen.
Section 1 and 2 of this manual describe in detail the most commonly used touch screen
manipulation.
This section can be used as a reference for locating a certain parameter setting or test. The
less frequently used parameters are also explained in this section.
4.2 Action Menu
Cut tests
4.2.1 OPOS Barcode
Click this to start the barcode workflow (see section 3.4.3).
4.2.2 OPOS sheet mode
This button is a shortcut to activate the OPOS sheet mode (see section 3.4.2).
Detailed Operation
OPOS sheet
OPOS Barcode
( )
1
Open file
Load
Cut off
FIG 4-1
4-1
ACTION MENU
4 Detailed Operation
Home
mode
( )
2
Replot
Cut sheet
Reset
Summa USB port 1
4-1