Setup And Operation; Starting And Shutting Down The Projector; Turn The Projector On - Eiki EK-600U Owner's Manual

Starting and Shutting down the projector

Turn the Projector On

1.
Connect the power cord to the projector. Then connect the other end to a wall outlet.
The Power button on the built in keypad is illuminated.
2.
Remove the lens cap.
3.
Turn on the connected devices.
4.
Turn on the projector by pressing " " on the remote control
or on the built-in keypad. The Status LED is flashing Blue
with a long blink.
The projector splash screen displays and connected
devices are detected.
Note:
The first time the projector is turned on you will be asked to select the preferred language, projection
orientation and a few other settings.
5.
If more than one input device is connected, press the Source key on the remote control to select an
input source (VGA1, VGA2, Video, S-Video, HDMI1, HDMI2, DisplayPort, or HDBaseT).
6.
The projector detects the source you selected and displays the image.
DLP Projector — Owner's Manual
11
— —
S O
etup and peratiOn