Operation Of Controls - Eiki LC-120 Owner's Instruction Manual

OPERATION OF CONTROLS (PROJECTOR)
Lift here to open.
INSIDE CONTROLS
9 0—— ——9
*0— ——6
f "lo
uva |O
| [O |
| +=Jo- e
"лмғ- OQ
ө
T. o
"го---ө
sioe
o
TOP INDICATION
INSIDE CONTROLS
VIDEO MODE BUTTON
Used to select video source (Built-in Video or External Video
equipment)
COLOUR SYSTEM BUTTON
Used to select colour system.
MENU BUTTON
Used to select on-screen adjustment displays for colour, tint, brightness,
contrast and sharpness. Press repeatedly to cycle.
LEVEL CONTROL BUTTONS
Used to adjust colour, tint, brightness, contrast, sharpness by pressing
+ or - button.
NORMAL BUTTON
Used to reset to normal picture adjustment preset by factory.
PICTURE SCAN BUTTON
Used to reverse scan for rear projection.
BLUE BACK BUTTON
Used to project a blue image without video noise.
VOLUME BUTTONS.
Used to adjust volume.
POWER (LAMP) ON/OFF BUTTON
Used to turn projection lamp on or off.
POWER INDICATOR
Lights dim when the projector is on.
Lights bright when the projector is stand-by position.
TEMPERATURE WARNING INDICATOR
Lights red when internal projector temperature Is too high.
LAMP REPLACEMENT INDICATOR
Lights orange when projection lamp is nearing end of service iie.