Output Menu - Eiki EK-600U Owner's Manual

DLP Projector — Owner's Manual

Output Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTpUT and press
the Enter button to enter the OUTpUT menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Aspect Ratio
Zoom
Edge Mask
Image Shift
Image Warping
3D Display
OUTPUT
Aspect Ratio
Zoom
Edge Mask
Image Shift
Image Warping
3D Display
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio.
• Press the t to reduce the size of an image.
• Press the u to magnify an image on the projection screen.
Edge mask the image to remove video encoding noise on the edge of video
source.
Press u into the next menu as below and then use p or q or t or u to
select item.
Image Shift
• H: Press the t u to shift the projected image position horizontally.
• V: Press the p q to shift the projected image position vertically.
Configure the image warping settings. See "Image Warping Menu" on page
33.
Configure the 3D display settings. See "3D Display Menu" on page 34.
32
—
Auto
Exit
D
escrIptIon
—