3D Display Menu - Eiki EK-600U Owner's Manual

DLP Projector — Owner's Manual

3D Display Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTpUT and press
the Enter button to enter the OUTpUT menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
3D Mode
3D → 2D
3D Enable
3D Invert
OUTPUT
3D Display
3D Mode
3D Enable
3D Invert
• DLP-Link: Select "DLP-Link" to use optimized settings for DLP Link 3D
Glasses.
• VESA 3D: Select "VESA 3D" to use optimized setting for VESA 3D
Glasses.
• Off: DLP-Link.
• 3D: Display 3D signal.
• L (Left): Display the left frame of 3D content.
• R (Right): Display the right frame of 3D content.
Set 3D format. Supports Mandatory 3D formats and frame sequential
3D@120Hz.
Invert 3D sync signal for the application of using single projector.
34
—
Off
Auto
Off
Exit
D
escrIptIon
—