DLP Projector — Owner's Manual
• Manual Adjustment
1.
Adjust color slide bars and judge image color by eye or meter. A user-defined color "adjustment" can be
applied.
2.
Use this submenu if you do not have specific color coordinates in mind and will judge color performance
by eye or meter. As for Meter Adjustment, each color control actually defines new x/y coordinates for
that color and changes its hue. The main colors (red part of red, green part of green and blue part of
blue) adjust the intensity of that color component, while the modifying colors (e.g. green part of red and
blue part of red) modify the x and y value and change the hue of that color. At the same time the main
colors also are used to control the color of the white point.
Signal Menu (VGA Input)
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select pICTURE and press
the Enter button to enter the pICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select Signal and press the
Enter button to enter the Signal menu. Press the arrow keys (pq) to select the menu option and press
the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired
settings and press the Enter button to confirm.
Green
blue
x
Advanced: Signal
Auto Image
Phase
Frequency
Horz Position
Vert Position
—
Red
PICTURE
On
Exit
30
—
Measured Data
Target Data