Remote Settings Menu - Eiki EK-600U Owner's Manual

I
tem
12V Trigger
Beep
Advanced
Lamp Settings
Optional Filter Settings
Information

Remote Settings Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and press
the Enter button to enter the OpTIOnS menu. Press the arrow keys (pq) to select Remote Settings
and press the Enter button to enter the Remote Settings menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
I
tem
User 1
• On: Choose "On" to enable the trigger.
• Off: Choose "Off" to disable the trigger.
• Off: No beep sound is audible when a key is pressed or in an error
event.
• On: Beep sound is audible when a key is pressed or in an error event.
Configure the advanced settings. See "Advanced Menu" on page 42.
Configure the lamp settings. See "Lamp Settings Menu" on page 43.
Configure the optional filter settings. See "Optional Filter Settings Menu" on
page 44.
Display the projector information for source, resolution, and software
version on the screen.
OPTIONS
Remote Settings
User 1
User 2
IR Function
Projector Address
The default value is "Test Pattern".
• Press u into the next menu and then use t or u to select "HDMI2",
"DP", "VGA2", "S-Video", "Test Pattern", "Zoom", or "Info.", "HDBaseT"
item.
User 1
Test Pattern
41
—
DLP Projector — Owner's Manual
D
escrIptIon
Test Pattern
Zoom
All
Exit
D
escrIptIon
—
Reserved
IR_IN & detect
GND