Setup And Operation; Installing The Projection Lens - Eiki EK-610U Owner's Manual

DLP Projector — Owner's Manual

Installing the projection lens

Before setting up the projector, install the projection lens on the projector.
Important:
• Before installation, check where the projector is used and prepare a suitable lens.
• For details, contact the sales dealer where you purchased the projector.
1.
Turn the projector off. Allow the projector to cool down into standby mode.
2.
Rotate the lens ring counter-clockwise and then
remove it from the projector.
3.
Rotate the lens cover counter-clockwise and then
remove it from the projector.
4.
With the label "TOP" on the lens assembly facing up,
install the assembly into the lens mount.
10
— —
S O
etup and peratiOn