Advanced Menu - Eiki EK-600U Owner's Manual

DLP Projector — Owner's Manual
I
tem
User 2
IR Function
Projector Address

Advanced Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and press
the Enter button to enter the OpTIOnS menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Direct Power On
Auto Power Off (min)
The default value is "Zoom".
• Press u into the next menu and then use t or u to select "HDMI2",
"DP", "VGA2", "S-Video", "Test Pattern", "Zoom", or "Info.", "HDBaseT"
item.
User 2
Zoom
• All: Choose "All", the projector can be operated by the remote control
from front or top IR receiver.
• Front: Choose "Front", the projector can be operated by the remote
control from front IR receiver.
• Top: Choose "Top", the projector can be operated by the remote control
from top IR receiver.
• Off: Choose "Off", the projector can't be operated by the remote control
from front or top IR receiver. By selecting "Off", you will be able to use
the Keypad keys.
Note:
"Front" and "Top" cannot be selected in standby mode.
Set the projector address. The projector will respond to IR remotes set
either at the same address as the projector or to IR remotes set to address
0.
OPTIONS
Advanced
Direct Power On
Auto Power Off (min)
Sleep Timer (min)
Quick Resume
Standby Power Mode
The projector automatically turns on when electrical power is connected.
Automatically turns the projector off after no signals are detected for
a preset number of minutes. If an active signal is received before the
projector powers down, the image will be displayed.
42
—
D
escrIptIon
Off
Off
Eco.
Exit
D
escrIptIon
—