Setup And Operation; Installing The Projection Lens - Eiki EK-810U Owner's Manual

DLP Projector — Owner's Manual

Installing the Projection Lens

Before setting up the projector, install the projection lens on the projector.
Important:
• Before installation, check where the projector is used and prepare a suitable lens.
• For details, contact the sales dealer where you purchased the projector.
1.
Press " " on the built-in keypad or press "
cooling down.
2.
Rotate the lens cap counter-clockwise. Then remove the lens cap.
3.
Remove both lens caps (front and back) on the lens.
4.
Install the lens assembly into the lens mount.
" on the remote control twice to turn off the projector after
10
— —

Setup and Operation