Turn The Projector Off - Eiki EK-600U Owner's Manual

DLP Projector — Owner's Manual

Turn the Projector Off

1.
Press " " on the built-in keypad or press "
message will appear on the displayed image.
2.
Press " " on the built-in keypad or press "
you do not press " " or "
Caution:
• The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/
Standby LED will flash Blue. When the On/Standby LED turns solid red the projector has entered
standby mode. If you wish to turn the projector back on, you must wait until the cooling cycle has
finished and the projector has entered standby mode. When the projector is in standby mode simply
press " " button again to turn on the projector.
3.
Disconnect the power lead from the electrical outlet and the projector.
" on the remote control to turn off the projector. A warning
Power Off?
Press Power key again
" on the remote control again to confirm your selection. If
" again, the warning message will disappear after 15 seconds.
12
— —