Remote Control Operating Range; Projector And Remote Control Buttons - Eiki EK-600U Owner's Manual

I L
tem
27 DVI/6
28 3D/0
29 DisplayPort/9
30 Video/5
Caution:
Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure.
Note:
Some keys may have no function for models that do not support these features.

Remote Control Operating Range

The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the front of the
projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above
and below the projector level or 10 degrees on the left side or right side of the projector. If the projector
does not respond to the remote control, move a little closer.

projector and Remote Control buttons

The projector can be operated using the remote control or the buttons on the rear of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in
use.
abeL
• Select the DVI input source.
• Use as numeric keypad number "6".
• Select the 3D input source.
• Use as numeric keypad number "0".
• Select the Display port input source.
• Use as numeric keypad number "9".
• Select the Composite Video input source.
• Use as numeric keypad number "5".
DLP Projector — Owner's Manual
D
escrIptIon
9
— —
s
ee page
-
-
66-67
-