Setup Menu - Eiki EK-600U Owner's Manual

Setup Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press
the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select the menu option and
press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Language
Projection
Screen Type
Menu Location
Pin
Projector ID
Audio Settings
Advanced
HDBaseT Control
Communications
SETUP
Language
Projection
Screen Type
Menu Location
Pin
Projector ID
Audio Settings
This item allows you to select an available language for the OSD display.
Select the projection mode, depending upon how the projector is mounted.
Projection
Choose the screen type from 16:10 or 16:9.
Choose the menu location on the display screen.
Menu Location
Configure the pin settings. See "Pin Menu" on page 36.
ID definition can be set up by menu (range 0-99), and allow user control an
individual projector by RS232.
Configure the audio settings. See "Audio Settings Menu" on page 37.
Configure the advanced settings. See "Advanced Menu" on page 38.
Configure the HDBaseT control settings. See "HDBaseT Control Menu" on
page 38.
Configure the communications settings. See "Communications Menu" on
page 39.
35
—
DLP Projector — Owner's Manual
English
D
escrIptIon
—
Exit
Exit