Replacing The Filter (Filter Is Optional.) - Eiki EK-600U Owner's Manual

DLP Projector — Owner's Manual
4.
Use the arrow keys (pq) to select lamp hours Reset and press the Enter button to enter its
submenu.
5.
Use the arrow keys (pq) to select "Yes" and press the Enter button to reset the lamp used hours
counter to zero.

Replacing the Filter (Filter is optional.)

The interval of the filter replacement is affected by the dustiness. Check the filters periodically for better
performance.
Filter parts number : 51.72025G001
Note:
Dirty filter may reduce the air flowing into the projector and the temperature in the projector may rise
as the result. This may activate the protection mechanism or damage the components.
Important:
Check, clean, and replace the filter periodically.
Caution:
To avoid damage, you need to support the dust filter cover with your both hands when removing it.
Perform the following to replace the filter:
1.
Turn the projector off. Allow the projector to cool
down into standby mode.
2.
Place the tips of your index fingers under the
bottom edge of the dust filter cover.
3.
Using the index finger and thumb of your both
hands, hold the dust filter cover firmly.
Reset?
No
Yes
56
— —