Setup And Operation; Installing The Projection Lens - Eiki EK-812U Owner's Manual

DLP Projector — Owner's Manual

Installing the Projection Lens

Before setting up the projector, install the projection lens on the projector.
Important:
• Before installation, check where the projector is used and prepare a suitable lens.
• For details, contact the sales dealer where you purchased the projector.
1.
Press " " on the built-in keypad or press "
2.
Rotate the lens cap counter-clockwise. Then remove the lens cap.
3.
Remove both lens caps (front and back) on the lens.
4.
With the label "TOP" on the lens assembly facing up, install
the assembly into the lens mount.
" on the remote control twice to turn off the projector.
10
— —
S O
etup and peratiOn