Canon NP2120 Service Manual page 75

1) Remove the Test Sheet, place a newspaper on
the copyboard, and close the copyboard cover.
2) Press the SORTIGROUP key on the control
panel.
the AE Referente Point."
3) Take notes of the value shown on the copy
counter of the control panel.
4) Press the SORT/GROUP key on the control
panel.
5) Enter '1' on the tenkey pad on the control panel.
6) Press the SORTIGROUP key.
7) Turn VR2 (AE slope) on the adjusting PCB so
that the value on the copy counter of the control
panel is the same as the value recorded in step
Figure 3-33
C A N O N NPZlZO/ZMO R N . 0 M A Y 1990 PRIHTEO I N J A P A H IIMPAIME AU JAPONI
8) Press the SORT/GROUP key after making ad-
justments.
9) Press the push switch (SWI) on the adjusting
PCB
Figure 3-34 Adjusting PCB