Canon NP2120 Service Manual page 141

The location of the copier should be chosen
based on the following considerations. If posible,
make a visit to the userfor a study of the site before
delivery of the copier.
A. The ambient temperature should be between
1 O%to80%. Avoid locationsnearwaterfaucets,
humidifiers, water boilers, and refrigerators.
B. Avoid locations near open fire or subject to dust
or ammonia fumes and direct rays of the sun.
C. Choose a well-ventilated place.
D. Make sure all feet of the copier will be in contact
with the floor.
E. Allow at least 10 cm (3.9 in) from any wall to
C A N O N NPZl20/2020 REY.1 OEC. 1992 PAINTEO IN JAPAN lIMPRIME AU JAPON)
INSTALLATION BZ%
(59.0 in)
2 m (78.7 in.) min. -
(2.1 mJ32 7 in. min II NP2120)
Figure 5-1
10 cm min. (3.9 in)
1 2 . 5 m (98.4 in.) min. -
(2 6 m/102.4 in. min if NP2120)
Figure 5-2 (with sorter)
1
1
5 - l