E. Checking The Image - Canon NP2120 Service Manual

E. Checking the Image

Place the Test Sheet on the copyboard,
and check the image.
Feed paper in the manual mode.
2
Put the OPERATOR'S MANUAL in the
3
pocket of the copyboard cover.
4
When all above work is finished, install the options (ADF-Al, MS-Al, Sorter-Al, Stapler Sorter-Bl , Stapler
Installation
The photosensitive drum is susceptible to light
and, if exposed to light, can cause white spots or
black lines on the copy image; take note of the
following:
minute;
sheet (from drum unit) or fresh copy paper and
place it in a dafk place whenever it is removed
from the copier.
Remarks
Check that copies are made without a problem and the
non-image width along the leading edge is correct;
Non-image width:
2.0 mm/0.08 ir! (approx.) for
2.5 mm/O.l in (approx.) on left/right side
Make tow-sided and overlay copies, and check that the
operation is correct; otherwise, make adjustments.
Check pick-up by the multifeeder (NP2120).
off the dirt using a flannel cloth coated with toner. Do
not use paper, lint-free or otherwise, or use a dry
cloth or solvent.
INSTALLATION BBZ3
edge
5 - 7