Canon NP2120 Service Manual page 139

11. Removing the Upper Separation
Claw
1) Open the delivety unit.
2 Mark the position of the upper separation claw
retainer using a scriber.
3) Removethe three mountingscrews, and remove
the upper separation claw retainer; be careful
with the delivety detection lever at the time.
Figure 4-102
4) Remove the spring, and remove the upper
separation claw.
@ Lower separation guide plate
3) Remove the spring, and remove the lower
CANON NP2¡20/2MO RN.0 MAY 1990 PRINTEU IN JAPAN IIMPAIME AU JAPONI
12. Mountingthe Upper Separation Claw
Reverse the steps above to mount the upper
separation claw with the following in mind:
if a scar is made on the upper fixing roller, mount
the claw about 4 mm displaced to the front.
13. Removing the Lower Separation
Claw
1) Open the delivery unit.
2) Slidethelowerseparationguideplatetoremove.
Figure 4-103
separation claw.
4 - 3 3